- TOP
- Products
- Connector Solutions Business
- List of Connect Solutions
List of Connect Solutions
-
- Series name
- IC30 series
- Features
-
IC sockets for 2.54-pitch mounting for SIP/DIP
• Spring contact with a double-sided plate for high reliability.
• Socket suitable for high-density mounting (vertically parallel).
• RoHS compliant.
-
- Series name
- IC26V series
- Features
-
IC sockets for 2.54-pitch mounting for SIP/DIP
• Round pin contacts with four-point contact structure for high reliability.
• Cutting sleeve prevents solder/flux penetration.
• Standoffs prevent blowholes in the solder.• Optional cutting. (Only single type)
• RoHS compliant.
-
- Series name
- CN125 series
- Features
-
• A holder fitting the primary button battery (20.0 mm in diameter × 3.20 mm in thickness)
FDK made, Hitachi Maxell made, and Panasonic made CR2032.
• Adopting a highly reliable two-point contact structure.
• Using gold-plated contacts for improvements in contact reliability.
• Adopting a holder structure allowing ease of button battery insertion and holding the battery securely.
• Emboss packaging to support automatic mounting.
• RoHS compliant.
• Supporting lead-free soldering.
-
- Series name
- NF series
- Features
-
1.27-mm-pitch-flat cable press-fit connector
• Smaller size (approx. 40% reduction from 2.54-mm-pitch connector)
• The cable bulk press-fit type has a unique three-fork contact
• RoHS compliant.
-
- Series name
- FA series
- Features
-
2.54-mm-pitch flat-cable press-fit connector
• MIL standard compliant.
• Latch header plugs are available in short and middle types.
• Flat cable IDC sockets have a two-point contact structure for high reliability.
• RoHS compliant.
-
- Series name
- CN084series
- Features
-
Micro TCA Carrier Hab (MCH) plug connector
• Low insertion/extraction force design allows simultaneous insertion and extraction of 680 pins.
• High-speed transmission characteristics: 12.5 Gbps (when mated with CN080)
• Mating with CN080 enables high-speed transmission at 12.5 Gbps.
• Low insertion and removal force design enables the simultaneous insertion and removal of 680 pins.
Adopted a structure with a step at the plug tip to distribute the peak during insertion in two stages.
The molded produce ensures precise thickness control.
• MCH module thickness conversion of t = 1.6 mm (standard) and t = 2.0 mm are supported (2.0-mm type is under planning).
• Absorbable structure for mounting tolerance between MCH modules.
• A wide variety of combinations provide a high degree of freedom in combination.
-
- Series name
- CN080series
- Features
-
Advanced MC connector for MicroTCA
• MicroTCA-compliant backplane connector.
• High-speed transmission characteristics: 12.5 Gbps supported
• Compression-type surface mount (no through-hole or soldering required)
• Signal contact design with impedance matching to differential 100Ω.
• Use of low-loss mold material.
• RoHS compliant.
-
- Series name
- CN074series
- Features
-
• Next-generation mezzanine card standard, PICMG AMC.0 compliant.
• Carrier board connector suitable for blades for AdvancedTCA (ATCA).
• Low loss, 12.5 Gbps supported.
• Compression type
• Differential impedance controlled to 100±10 Ω.
• Use of low-loss materials.
• GR-1217-CORE compliant.
• Full support for AdvancedMC standard products.
• RoHS compliant.
